Keg King MkIII Regulator

The new MKIII regulator has all the advantages of the older MKII model but several internal improvements have been made to make the regulator even more reliable.

NEW IMPROVEMENTS IN SEAT AND SEAT CAP DESIGN
The most common regulator failure that is seen in the industry is failure with the seat and seat cap assembly (parts 10-17). The issue is almost always caused by contamination in these parts. In the past most regulators in Australia come with a single sintered filter on the inlet spigot (nut and stem). The new Keg King MKIII model gas double filtration and includes a second sintered filter on the underside of the seat cap assembly (part 17).

NEW IMPROVEMENTS IN SEAL COMPOSITION
The seat and seat cap assembly has also been re-designed and now takes advantage of ultra-high molecular weight polyethylene (UHMWPE) the new UHMWPE is significantly better in chemical resistance and stability than the Teflon that is normally used in other brand names.

FULLY ENCAPSULATED SEAT TECHNOLOGY
The regulators have also been designed so that the whole seat and seat cap assembly (parts 10-17) are manufactured as a fully encapsulated part. This adds to the reliability and in the case that the regulator is eventually opened up for servicing it reduces the chance of this assembly becoming contaminated by the service agent. This further improves reliability.

Suitable for CO2, Oxygen, Argon and Nitrogen Our MK III regulator is made with high quality machined brass body and can be used on multiple gasses.

The regulator has a large body for high flow rates and comes with a precision diaphragm for more accurate adjustment. The Regulator also has a large adjustment knob for easy adjustment.

This regulator is can also be used on a range of different gasses including: CO2, Oxygen, Argon, Helium and Nitrogen.

The standard type 30 nut and stem comes fitted to the regulator for CO2 and CO2/nitrogen mixed gasses.

Other nut and stems can be interchanged:
Type 10 Nut and Stem : Oxygen, Argon, Helium
Type 30 Nut and Stem : CO2, CO2/Nitrogen Mixed Gas
Type 50 Nut and Stem : Nitrogen

Exploded diagram and parts list

Service Kit

CONSIDER GETTING A ONE WAY CHECK VALVE TO PROTECT YOUR REGULATOR FROM LIQUID TRAVELLING BACK FROM YOUR KEGS!